今天小编要和大家分享的是ADP8870相关信息,接下来我将从ADP8870典型应用电路及封装尺寸图,hzbpa88705这几个方面来介绍。

ADP8870相关技术文章ADP8870典型应用电路及封装尺寸图hzbpa88705

ADP8870相关技术文章ADP8870典型应用电路及封装尺寸图

The ADP8870 combines a programmable backlight LED charge-pump driver with automatic phototransistor control of the brightness (LED current) and a PWM input to control the scale of the output current. This combination allows significant power savings because it automatically changes the current intensity based on the sensed ambient lighting levels and the display image content. It performs this function automatically, eliminating the need for a processor to monitor the photo-transistor. The light intensity thresholds are fully programmable via the I2C interface.The ADP8870 allows up to six LEDs to be independently driven up to 30 mA (maximum). An additional seventh LED can be driven to 60 mA (maximum). All LEDs are individually programmable for minimum/maximum current and fade-in/fade-out times through an I2C interface. These LEDs can also be combined into groups to reduce the processor instructions during fade-in and fade-out.Driving these components is a two-capacitor charge pump with gains of 1×, 1.5×, and 2×. This setup is capable of driving a maximum IOUT of 240 mA from a supply of 2.5 V to 5.5 V. A full suite of safety features, including short-circuit, overvoltage, and overtemperature protection, allows easy implementation of a safe and robust design. Additionally, input inrush currents are limited via an integrated soft start combined with controlled input-to-output isolation.

ADP8870典型应用电路

ADP8870封装尺寸图

关于ADP8870就介绍完了,您有什么想法可以联系小编。