MAX16820+MAX9141组成的LED驱动电路 MAX16820,M技术文章

今天小编要和大家分享的是MAX16820,M相关信息，接下来我将从MAX16820+MAX9141组成的LED驱动电路，首页 ic型号导航 首字符m型号页 首字符m的型号第1141页 > max16820这几个方面来介绍。

MAX16820,M相关技术文章MAX16820+MAX9141组成的LED驱动电路

shows how to detect a short-circuited LED with the aid of a comparator (MAX9141). Filter R₁C₁ converts the AC PWM signal at DRV to a DC voltage (V_D) proportional to D × V_CC. V_D should be sampled when its value is greater than (perhaps) 90% of its steady-state value, which requires a period of at least 2.3R₁C₁. Because the comparator's Latch Enable (LE) latches the output when LE is low, LE should assert not earlier than 2.3R₁C₁ after DIM goes high. R₂C₂ in combination with D₂ ensures that LE de-asserts immediately after DIM goes low. The R₂C₂ value is higher than R₁C₁, so the comparator enables when the input signal reaches at least 90% of its steady-state value. D₂ discharges C₂ immediately after DIM goes low, which latches the output as soon as the LEDs go off.Figure 2. Adding this comparator circuit to the Figure 1 circuit provides detection of shorted LEDs.

关于MAX16820,M就介绍完了，您有什么想法可以联系小编。